SPEED DOOR | Muelle de Carga Vertical

VERTICAL STORING DOCK LEVELLER

Our vertical storing dock leveller is the perfect solution for load and unload in companies that need maximum climate control and high levels of cleanliness. SPEEDDOOR offers you this system of effective load and practical with which, together with other components such as inflatable shelters or sectional doors, you can get an internal temperature control significantly major, as well as reduce the risk of damage to doors and minimize the dirt entry.

OPERATION
1 It stored vertically in the center, which allows the header door stay closed offering a narrow close.
2 The doors of the truck can remain closed and the driver has no need to leave the cabin.
3 The dock assistant opens the doors of the truck from the inside of the building and down the dock to reach the ideal position.
4. The process of load and unload is performed as in a conventional dock.

CONCEPT
Vertical loading dock consists of the base, which is made of embossed sheet 6/8 and 13/15 embossed sheet fixed lip.
Improves efficiency and reduces the loss of power of the refrigerators trucks, that symbolizes an ideal solution for cooling trailers and installations that require high sanitary standards.
It is easy to operate due to its simple and efficient control panel, sequentially, to save time in loading and unloading.
When leveler is stored, the door can be closed completely to the floor of the well keeping out Earth, insects and rodents and seal improves the safety of facilities to prevent unauthorized entry. In addition, its vertical storage position allows complete cleaning of the well, which improves their hygienic conditions.

SECURITY
Speed Door has equipped the vertical storing dock leveller, of total security with the following elements:
1. Hydraulic speed fuse; to prevent the dropping of the platform in the case of a ruptured hose or failure in hydraulic solenoid.
2. Side footguards; high visibility in accordance with the regulations.
3. Position sensor; It communicates the position of the dock system, warning when you are storing safely.
4. Security of output; they are 76 mm and avoid that forklift drivers get out of the side of the dock accidentally.
5. Mast of security; supports the dock for maintenance and inspection below the safe dock.
6. Rank sensor; electronically allows that dock be always level, letting you to be constantly adjusted to the height of the trailer and reduce the risk of coup workers and damage to the loads.
7. STOP button; located on the control station and stops the dock halfway during an emergency.

ENERGY-SAVING
A study conducted in Valencia (Spain) in the 2010 year, studied and calculated the energy savings that could reach to get to install a dock of vertical storage combined with an inflatable shelter companies that traded with refrigerated, such as fish and vegetables products. Looking at diagrams, saving financial and CO2 emission by city can be seen. While the results vary depending on several factors of which is surrounded by the company, for example, if it's storage of frozen food food fresh, local weather or the time of day at the time of loading and unloading, the saving is remarkable.

The researchers estimated that vertical storage docks save Valencia (49 loading docks) facilities around €168,000 a year approximately, even facilities that handled frozen products underwent a total saving of 57.2%, followed by the facilities of refrigerated products.