MODELS OF
STACKABLE DOORS

DOOR FAST STACKABLE MEGA-SDN

Stackable fast door designed especially for substantial and complex installations, with accesses addressed to the outside.
Evolution of the large model SDN, structure, reinforcements and motorization are redesigned to cover the steps where the door and environment settings are complex, for example hangars.
Reinforced with horizontal Interior sections which give a great consistency, for intensive use under pressure or major depressions in air.
Its structure allows you to take advantage of gaps in step.
Seal and low maintenance.
Frame and curtain of canvas to choose among several possibilities, including door viewers.
It acts with different opening systems.

  • Self-supporting metal frame:
    • galvanized steel.
    • stainless steel.
    • painted in polyurethane.
  • Backdrop: canvas polyester high resistance to wear, corrosion and discoloration. Self-extinguishing M2 fire resistance.
  • Lateral guides with brushes from leaks.
  • Three-phase motor with electric brake of soft stop c/c++ and manual release.
  • Mechanical limit switches integrated in the engine to control the position of the door.
  • Standard speed between 1 and 1.8 m/s.
  • Security: transceiver photocells; anti-crushing safety probe; lower zone of danger.

OVERALL DIMENSIONS
Maximum dimensions: according to study by our technical office.
Lintel: 950 mm (GAAP)
Vertical Bracelet (non-drive side): 250 / 500mm.
Vertical wrist (motor side): 250 / 500mm.

TECHNICAL CHARACTERISTICS
STRUCTURE


Our door guarantees a great durability, reliability and energy saving, with a minimum of maintenance. Each door is designed in a personalized way, to withstand winds and bad weather, since it may be different depending on the area where it is installed. The upper cross-beam is made of galvanized steel, able to withstand motor, bearings, roller, lifting straps, and the door itself. Our model standard consists of two panels of polyester, PVC coated and placed inside the double warhead profiles, located at the ends of the horizontal bar, mounted on two lateral columns to cushion the pressure of the wind, so that the friction and noise are reduced during the opening and closing operations.
The panel is composed of individual sections, so that, in case of damage or wear, there is no need to replace the entire panel, only the damaged section. The horizontal bars consist of aluminium profiles with bolts designed to withstand strong winds and customized based on the needs of our customers and the peculiarities of the area where is installed the door.
Guides are made of galvanized steel, also personalizing your size and shape to withstand strong winds.
Galvanized thickness: 2 mm. Quality: DX51D Z-275NA
Steel stainless thickness: 2 mm. Quality: AISI 304

CURTAIN


It consists of two intermediate trusses that are placed between the two PVC backdrops and are set through an anodized aluminium profile and set screws. They confer resistance to wind to the sliding door on the side rails using special at both ends sliding blocks, also equipped with special noise damping bearings.
Plastic tarps are high quality with resistance to wear, abrasion, discoloration and conform to certificate flame retardant type M2. Colors in samples (red, yellow, green, dark blue, blue light, white, black, grey, cream, orange).
All welds made on the canvas are made by high frequency welding. Includes area of viewers type rectangular apaisados at the height of the view.

Technical characteristics
Polyester support: 1100 Dtex.
Total weight: 900/1300 grams/m2
Breaking strength: 4300 / 4000 N/50 cm
Tear strength: 500/500 daN
Adhesion: 20 N/cm
Temperature resistance: - 40 ° / + 70 °
Lacquered: 2 faces
Windows: PVC, glass of high resistance

Colors

GEARMOTOR


Three-phase motor with direct attack on the primary shaft, electric brake of soft stop c/c++ and manual release of the crank at the height of the engine. Limit switches mechanical or encoder integrated in the engine to control the position of the door at any moment. Standard speed between 1 and 1.8 m/s.

Technical characteristics
Rpm: 1400/3000
Voltage: 400
Phases: III
Power: 0.75 3 CV according to door
Protection: IP 54
Brake: electromagnetic
Input rpm: 1400
RPM output: 92 142

SECURITY


Through photocells transceiver in the vertical door guides, with security system type test before performing maneuvers of closing.
Bottom of the curtain with conveyor systems antisquash safety, with detector type optical supervised at all times, inside bottom of danger, signposted as mobile danger zone finished yellow diagonal stripes in black. Signal system of the same type Radioband radio monitored before the closing manoeuvre, thus avoiding the placement of curly dock type cables.
Optionally the door can provide a system of opening by counterweight or with battery type ups (uninterrupted power supply) in case of alarm or power supply failure.

ELECTRICAL MANEUVER


Metal box for the maneuvers of control, designed for Speed Door España complying with regulations of electric protection of low voltage. In the joins a circuit board with control logic, designed to perform thousands of operations a day, equipped with LEDs for control functions or possible anomalies of the door.
Contactors, motor guard, adjustable, pre-installation of detector receiver, magnetic or flashing lights. Buttons for opening, closing, emergency stop and led indicator of voltage on front cover. Connection to their diet with 1.5 metres of cable 5 x 2.5, with plug 16 A Cetac type.

DRIVES


In Speed Door we have a wide range of drives with different controls, buttons, and other systems to optionally include in our doors, with the aim of facilitating the transit of goods, personal or vehicles.
-Handles ceiling.
-Photoelectric cells.
-Motion and presence detector.
-Transmitter remote.
-Additional buttons.
-Interconnection with any machine, roller, or assembly line.

Download tab technique fast door STACKABLE MEGA SDN